Product Specifications
|
Product ID
|
Connector Model
|
Maximum Current
(A) |
Maximum Voltage
(V) |
Size
(mm) |
Weight
(g) |
| IA007 | SH1.0-2P | 0.4A | 6V | 39x15.5x20 | 3.5 |
Introduction
Used with a Power Distribution Board (PDB) - 4 Channels, it is used to adjust the voltage of the corresponding channel, thereby achieving the function of adjusting the speed or brightness of the corresponding device.
-
The Potentiometer Board with SH1.0 Connector is used for voltage regulation. It requires a Wire Pair with SH1.0 to connect to the SW0~4 channels on the Power Distribution Board (PDB) - 4 Channels. When the knob is turned counterclockwise, the output voltage of the corresponding channel decreases. When the knob is turned clockwise, the output voltage of the corresponding channel increases.
-
If the Potentiometer Board is connected to any of the SW1~SW4 channels, ensure that the maximum current of the corresponding channel's device does not exceed 0.4A, and the battery voltage does not exceed 6V.
-
If the Potentiometer Board is connected to the SW0 master switch, ensure that the combined maximum current of all channels SW1~SW4 does not exceed 0.4A, and the battery voltage does not exceed 6V.
-
It is normal for the triode on the Potentiometer Board to heat up. When installing it on a model, please leave space for heat dissipation and avoid direct contact, which would cause the model material to heat up and soften.
In the box
-
Potentiometer Board with SH1.0 Connector x2pcs
-
Wire Pair with SH1.0 x2pcs
Consideration
-
Please do not forcefully twist the connectors to avoid wires loosening or detaching.