Bambu Lab

Support for PA/PET

Breakaway Support (formerly 'Support G')

$61.99 AUD

GST included.

Product Features
  • Easy removal by hand
  • Perfect support interface
  • Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, etc.
  • Comes with High Temperature Reusable Spool
  • Diameter: 1.75mm +/- 0.03mm

Cautions for Use
  • ONLY used for support interface
  • Not used for printing models alone
  • Dry out before use
  • Remove support structure promptly
  • AMS compatible
Color:
Type:
Size:
Quantity:
$61.99 AUD
Order Info
  • Order will be shipped out from AU warehouse in 1-3 business days once being processed.
  • Free shipping on orders over AUD $77.
图片加载失败文案 图片加载失败文案


RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

图片加载失败文案 图片加载失败文案


Recommended Printing Settings
Drying Settings (Blast Drying Oven) 80 °C,12h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 280 - 300 °C
Bed Temperature (with Glue) 80 - 110 °C
Printing Speed < 100 mm/s
Physical Properties
Density 1.17 g/cm³
Vicat Softening Temperature N / A
Heat Deflection Temperature N / A
Melting Temperature 255 °C
Melt Index 29.2 ± 2.1 g/10 min
Mechanical Properties
Tensile Strength N / A
Breaking Elongation Rate N / A
Bending Modulus N / A
Bending Strength N / A
Impact Strength N / A



Printing Tips

• Support for PA/PET needs proper drying before printing: recommended drying temperature is 80 ℃ for 8 hours in a blast drying oven, or 90 ℃ for 10 hours on heat bed. Learn more about filament drying. Please refer to Filament drying cover on WIKI.

• We recommend removing the support structures within 2 hours after printing to prevent them from sticking after absorbing moisture. If sticking occurs, dry the model to ease the removal.


What's in the Box

图片加载失败文案 图片加载失败文案

Filament with Spool*1 & Desiccant*1

图片加载失败文案 图片加载失败文案

Filament Label*1

图片加载失败文案 图片加载失败文案

Package*1


Attribute Comparision

1
Support for PLA Support for PA/PET
Color White Green
Nozzle Temperature 210-230°C 280-300°C
Bed Temperature 35-45°C 80-100°C
Print Speed <200mm/s <100mm/s
Water Soluble No No
Recommended for PLA PAHT-CF,PA6-CF,PA-CF, PA-GF, PET-CF
Cannot be used with PA-CF, PA-GF, PET-CF, ABS, PETG, TPU, ASA PLA, ABS, PETG, TPU, ASA


1. Support filament cannot be used to print an item alone, but only to print the supporting portion of that item. AMS is recommended for multi-material printing with Bambu Support filament.
2. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.