Bambu PLA Marble
Bambu PLA Marble mimics the appearance of natural stone.
With inorganic particles in its composition, it offers a vivid stone-like texture that resembles marble, granite, or bricks. It adds a touch of nature to your prints and provides a stunning finish for your projects.


Accessory Compatibility
Recommended | Not Recommended | |
Build Plate | Cool Plate, High Temperature Plate or Textured PEI Plate | Engineering Plate |
Hotend | Hardened Steel Nozzle 0.4 / 0.6 / 0.8 mm) Stainless Steel Nozzle (0.4 mm) |
Stainless Steel Nozzle (0.2 mm) |
Glue | Bambu Liquid Glue Glue Stick |
/ |
PLA Marble Hex Code Table
Color | Hex Code | Display |
White Marble | #F7F3F0 | |
Red Granite | #AD4E38 |
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.


Recommended Printing Settings | |
Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
Nozzle Temperature | 190 - 230 °C |
Bed Temperature (with Glue) | 35 - 45 °C |
Printing Speed | < 250 mm/s |
Physical Properties | |
Density | 1.22 g/cm³ |
Vicar Softening Temperature | 57 °C |
Heat Deflection Temperature | 56 °C |
Melting Temperature | 156 °C |
Melt Index | 32.2 ± 4.5 g/10 min |
Mechanical Properties | |
Tensile Strength | 33 ± 4 MPa |
Breaking Elongation Rate | 6.7 ± 0.5 % |
Bending Modulus | 2920 ± 180 MPa |
Bending Strength | 75 ± 5 MPa |
Impact Strength | 24.0 ± 2.5 kJ/m² |
Printing Tips
• Drying PLA Marble is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed. Learn more about filament drying. Please refer to Filament drying cover on WIKI.
What's in the Box:


Filament*1 & Desiccant*1


Instructions*1 & Spool Sticker*1


Package*1


Filament Label*1


General Inquiry
Technical Support