Bambu Lab

Bambu Multi-Sheet Combo
(2 High-Temp+1 Cool)

$57.60 AUD

Price is adjusted in response to changes in exchange rates. GST included.

Style:
Compatibility:
Quantity:
Shipped from AU warehouse
Free Shipping on orders over AUD$65
● Free shipping excluding printers and AMS
14-Day Refund Service, 30-Day Replacement Service

You may cancel order within two hours of submitting your order. For complete details, read our ORDER CANCELLATION
Overview: The Bambu High-Temperature Sheet (Smooth PEI) is a sheet with an adhesive side for replacing the sheet on your High-Temperature Plate.

Compatibility: X1 Series, P1P

Note: 
   The Bambu High-Temperature sheet is easy to replace and install.
  1. After tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet
  2. You can use an anhydrous ethanol solution or isopropanol solution with a concentration of over 90% to wipe the plate. 
  3. You can also use detergent and water to clean the surface.
It is also best to use special solid glue (Glue Stick for Build Plate) before printing to avoid damage during model removal. 


How to print your Film Sticking Fixture?
  • Bambu Lab 3D printer with two film sticking fixture models to help you change spare sheets. Print 'Film Sticking Fixture' from the built-in files!

Recommended settings for Bambu High-Temperature Plate

These are some recommendations for settings to get the best results while using the Bambu High-Temperature Plate. Please note that these settings are just a recommendation, and other slicer settings might need to be adjusted based on the printed model and the filament requirements.
Material
Hotbed temperature
Glue Stick Required?
Upper Glass Cover Plate Removed?
PLA/PLA-CF/PLA-GF
45℃~60℃
Recommended
Yes
ABS
90℃~100℃
Recommended
No
PETG
80℃
Yes
Yes
TPU
35℃
Recommended
Yes
ASA
90℃~100℃
Recommended
No
PVA
45℃~60℃
Recommended
Yes
PC/PC-CF
100℃~110℃
Yes
No
PA/PA-CF
100℃~110℃
Yes
No
Overview: The Bambu Cool Sheet is a sheet with an adhesive side for replacing the sheet on your Cool Plate.

    Recommended settings for Bambu Cool Plate

    These are some recommendations for settings to get the best results while using the Bambu Cool Plate. Please note that these settings are just a recommendation, and other slicer settings might need to be adjusted based on the printed model and the filament requirements.
     
    Material
    Hotbed temperature
    Glue Stick Required?
    Upper Glass Cover Plate Removed?
    PLA/PLA-CF/PLA-GF
    35℃~45℃
    Yes
    Either
    TPU
    30℃~35℃
    Yes
    Either
    PVA
    35℃~45℃
    Yes
    Either